Wolf Tooth GC Cog For Shimano 10 Speed is our Top recommended if you are looking for low price goods in best bike Categories.
- Category : bike with special price
- In-stock! Order now!
- Average rating: 4.3
- based on 110 reviews
- load more
what advantages and Full spec of Wolf Tooth GC Cog For Shimano 10 Speed :
DESCRIPTION : It is NOT compatible with any other brand or model of cassette. The GC works great with the newer SRAM rear derailleurs however. This is especially important on bikes with rear suspension. This cog is made with the premium precision and finish one can expect from WTC, and this enables quite possibly the best feeling shift in the cassette. Check out the GC tech page Compatible with Shimano XT 11-36t (CS-M771) and Shimano XT 11-36t (M980) cassettes only. If you think you might need the longer B-screw, order one separately or just go to your local hardware store and pick up an M4 x 25 socket head cap screw. Make sure that when shifted to the 40/42T cog, there is still some amount of forward travel possible with the rear derailleur cage. Requires removal of 17T or 15T cog from cassette CNC machined in the USAThe introduction of 11-36T cassetes a few years ago changed mountain biking forever. Use of this cassette sprocket requires removal of the 17T or 15T cog & SRAM chains - all function well. Note: the GC 42 is not compatible with 2011 or older SRAM rear derailleurs due to the location of the upper jockey wheel. This add-on cog replaces one of the middle cogs in your 10-speed cassette cluster, giving you an extra-low 40T or 42T granny gear without requiring you to upgrade your entire drivetrain! Wolf Tooth's GC cassette cog is so big that when machining the first batch, the machinist thought he made a mistake! If being big is cool then the GC cassette cog is the coolest cog around. The larger gear range made 1x drivetrains more practical, but some found that it still wasn't a wide enough gear range. This cassette sprocket is only for use with Shimano brand 10spd XT & spacer from your cassette. The shift points are properly timed to the tooth locations on the 36t Shimano cogs for optimal shifting performance. XTR cassettes. Note on ''B-screw'': A longer screw is almost never needed with SRAM derailleurs and only needed for about 50% of Shimano derailleurs. It is difficult or impossible to get satisfactory shifting with the 2011 or older SRAM rear derailleurs so it is not recommended to use the GC if you have one of these. You may need a longer chain than what is presently on your bike. Compatible only with the following Shimano 10spd cassettes: XT 11-36t (CS-M771) XTR 11-36t (M980) Not compatible with SLX 11-36 cassettes because the 17t cog cannot be removed. We have tested with Shimano, KMC & best bike
|
Tuesday, 24 November 2015
|
0
comments
0 comments:
Post a Comment